Skip to main content
Loading…
This section is included in your selections.

The developer may provide alleys in a development, subject to the following standards:

(1) Dead-end alleys shall be prohibited unless there is provided a turnaround with an asphalt diameter of 80 feet and a right-of-way diameter of 100 feet.

(2) Sharp changes in direction of alleys shall be avoided. Where such changes cannot be avoided, there shall be a corner cut-off with a minimum inside radius of 50 feet.

(3) Right-of-Way Widths. Minimum right-of-way width of all alleys shall not be less than 20 feet.

(4) Roadway Widths. Minimum roadway widths for all alleys shall not be less than 16 feet. [Ord. 3398 § 2, 1999; Code 1970 § 26.12.080.]