Skip to main content
This section is included in your selections.

(1) Minimum lot area: 10,000 square feet.

(2) Density. All developments shall be compliant with the Comprehensive Plan land use density table in PMC 25.215.015, and shall contain no greater than three dwelling units per lot.

(3) Maximum lot coverage: 40 percent.

(4) Minimum Yard Setbacks.

(a) Front: 20 feet.

(b) Side. Principal building: 10 feet, except in zero-lot-line developments in which case no side yard setback is required from the common lot line, provided the remaining side yards are at least 10 feet each.

Accessory buildings: Five feet, provided the accessory building is located behind the rear building line.

(c) Rear. Principal building: Equal to the height of the dwelling.

Accessory buildings: Accessory buildings adjacent to an alley may be placed on the alley line provided there are no openings in the wall adjacent to the alley. Garages with vehicle doors adjacent to an alley shall be set back from the alley 20 feet. Where there is no alley, the setback shall be five feet.

(5) Maximum Building Height.

(a) Principal building: 35 feet, except a greater height may be approved by special permit.

(b) Accessory buildings: 15 feet.

(6) Fences and hedges: See Chapter 25.180 PMC.

(7) Parking: See Chapter 25.185 PMC.

(8) Landscaping: See Chapter 25.180 PMC.

(9) Residential design standards: See PMC 25.165.100. [Ord. 4575 § 7, 2022; Ord. 3731 § 8, 2005; Ord. 3354 § 2, 1999; Code 1970 § 25.26.050.]